Slotted-Arm Window Friction Stay with Extended Guide Track

This window friction stay is configured around an extended guide track and an articulated arm set for a projecting sash. The most visible distinction is the long upper sash arm, which carries several round and elongated fixing openings rather than a short end bracket. Reinforced pressed channels are formed along the diagonal links, and dark guide components are positioned inside the track near the sliding and pivot points. The linkage opens into a broad triangular geometry and folds back toward the narrow rail. Friction stays commonly use a track and linked arms to support casement or awning sash movement.

Matching must be based on full installation data. Buyers should verify track length, sash-arm length, mounting dimensions, fixing-hole positions, folded stack height, hinge configuration, opening direction, profile connection, and required load target. Sash width, height, weight, intended opening angle, and clearance around the frame should be reviewed together. Handing and any adjustment or end-stop requirement also need confirmation before production.

Quotation preparation requires window and sash profile sections, a dimensioned reference, installation side, intended opening path, finish reference, order quantity, and packaging instructions. CHIER can then compare the slotted arm layout, reinforced links, guide-track interface, and pivot positions with the proposed window assembly.